Gypsum Plate Regular

It is a type of flexible Gypsum plate with smooth surface used indoors. The front side is covered with ivory and the back side is covered with gray paper.

White PEG PLASTER PLATE is used in the construction of a non-bearing partition wall by screwing on both sides of the metal skeleton, a curtain wall by screwing to one side of the metal skeleton or glued to the existing building wall, a suspended ceiling by screwing onto the metal skeleton attached to the existing flooring with a suspension system. PROPERTIES: It is lightweight and flexible. Horizontal and vertical transportation is smooth. It has high fracture resistance. It gives less waste in loading and unloading than equivalent plates. It is very easy to cut and apply. Structures are finished in a short time as it increases the speed of construction. Suitable for all types of finishing. It can be primed and painted, SATENTEK can be drawn on the surface, wallpaper can be covered. The bearing element cross-sections of the structures designed according to COREX systems are reduced; contributes to the building economy at the very first stage. COREX systems are easy to fix and disassemble. It is conducive to spatial modification. All kinds of installations can be passed through COREX application gaps, facilitating installation works. Narrow section partition wall can be made using PERFORMANCE COREX. The building usage area increases on a m2 basis. When used with insulating materials, it provides an effective increase in sound and heat insulation. Reinforced concrete increases the fire resistance of steel and wooden structural elements. It is a breathable material. It creates a healthy environment by balancing moisture. SUGGESTIONS For bonding COREX to existing building wall surfaces, ADERTEK bonding plaster is used. In COREX joint applications, DERZTEK joint filler plaster is used. DALSAN ALCI SANAYI VE TICARET A.S. White COREX Specifications General Type All Types Length* 2500 mm 2000 mm-3600 mm Width 1200 mm 1200 mm Thickness 12.5 mm 6.5 mm 9.5 mm Average weight ~8 kg/m2 ~6 kg/m2 ~7 kg/m2 Fracture in bending (Perpendicular to paper fibers) Fracture in bending (parallel to paper fibers) Edge type Thermal conductivity value ( ) Coefficient of resistance to water vapor passage ≥ 550N ≥210 N 12.5 mm 15 mm 18 mm ~8 kg/m2 ~9.6kg/m2 ~15 kg/m2 ≥280 N ≥400 N ≥550 N ≥650N ≥770 N ≥110 N ≥160 N ≥210 N ≥250N ≥300 N HR HR (Thinned Edge) – KK (Blunt Edged) 0,25 W/mK 0,25 W/mK 10 Fire Reaction A2 – s1, d0 A2 – s1, d0 (According to TS EN 520 +A1) Standard General Type All Types Standard Standard Standard EN 520 +A1 (Gypsum Sheets – Recipes – Requirements and Test Methods) Type Gypsum Sheet (A) Packaging General Type All Types Thickness 12,5 mm 6,5 mm 9,5 mm 12,5 mm 15 mm 18 mm Number of sheets on pallet 50 pcs/pallet 60 pcs/pallet 60 pcs/pallet 50 pcs/pallet 40 pcs/pallet 30 pcs/pallet *Different lengths than 2500 mm are produced according to special order. Our company reserves the right to change the product specifications when it deems necessary. Quality Management System Environmental Management System ISO 9001:2015 ID 15 100 117415 ISO 14001:2015 ID 15 104 191727 03/2022_Rev: 12 PK-T01.08