PEG GYPSUM PLASTERBOARD REGULAR
It is a type of flexible gypsum plasterboard with smooth surface used indoors. The front side is covered with ivory and the back side is covered with gray paper
Features: |
• Clean and easy installation |
• Time saving |
• High surface quality |
Usage Areas: |
• Suspended ceiling |
• Partition wall |
• Wall cladding |
• Dry plaster wall cladding |
Dimensions and General Features: |
• Thickness: 12.5 / 15 mm |
• Weight: 9 – 9.5 / 10 – 11 kg/m2 |
• Width: 1200 mm |
• Length: 2200 / 2300 / 2400 / 2500 / 2600 / 2700 / 2800 / 3000 mm |
• Packaging: 30 / 50 pcs / pallet |
Product Standard: TS EN 520 + A1 – TYPE A |
White PEG Gypsum Plasterboard is used indoors for the construction of:
- Non-load bearing partition walls by screwing to both surfaces of the metal frame,
- Curtain walls by screwing it to one face of a metal frame or by bonding it to the existing wall,
- Suspended ceilings by screwing it to the metal frame that has been fastened to the existing floor with a hanger system.
PROPERTIES:
It is lightweight and flexible. It can be carried horizontally and vertically without any problem. Because of its high flexural strength, its breakage rate during loading and unloading is low compared to equivalent boards. It is very easy to cut and apply. Structures are finished in a short time as it increases the speed of construction. It is suitable for all kinds of finishes. It can be undercoated and painted. PEG Satin Finishing Plaster and wallpaper can be applied to it. Buildings that are designed with PEG Gypsum Plasterboard systems have structural elements with narrower cross-sections, leading to economies of scale right from the start. PEG Gypsum Plasterboard systems are easy to fix and disassemble. It is conducive to spatial modification. PEG Gypsum Plasterboard systems can easily be mounted and dismantled, so it is possible to make changes in layouts. All types of pipework and wiring can be placed between or behind the PEG Gypsum application, so installation services are easy.
PERFORMANCE:
As it is possible to construct narrow cross-sectional partition walls using PEG Gypsum Plasterboard systems, the available floor area of the building is increased on square meter basis. When used with insulation materials, it provides an effective increase in acoustical and thermal insulation. It increases the fire resistance of structural elements such as reinforced concrete, steel and wood. As it is a breathable material, it leads to a healthier environment by stabilizing humidity.
SUGGESTIONS:
Use PEG Plaster of Paris bonding plaster to bond PEG Gypsum Plasterboard to the existing wall.
Use PEG Satin Plaster jointing compound on PEG Gypsum Plasterboard joint applications.
| |||||||
| General Type | All Types |
| ||||
Length* | 2500 mm | 2000 mm-3600 mm |
| ||||
Width | 1200 mm | 1200 mm |
| ||||
Thickness | 12.5 mm | 6.5 mm | 9.5 mm | 12.5 mm | 15 mm | 18 mm |
|
Average weight | ~8 kg/m2 | ~6 kg/m2 | ~7 kg/m2 | ~8 kg/m2 | ~9.6kg/m2 | ~15 kg/m2 |
|
Flexural strength (Perpendicular to paper fibers) | ≥ 550N | ≥280 N | ≥400 N | ≥550 N | ≥650N | ≥770 N |
|
Flexural strength (parallel to paper fibers) | ≥210 N | ≥110 N | ≥160 N | ≥210 N | ≥250N | ≥300 N |
|
Edge type | IK | IK (Thinned Edge) – KK (Blunt Edged) |
| ||||
Thermal conductivity (ƛ) | 0.25 W/mK | 0.25 W/mK |
| ||||
Water permeability resistance factor | 10 |
| |||||
Fire class | A2 – s1, d0 | A2 – s1, d0 (According to TS EN 520 +A1) |
| ||||
Standard | |||||||
| General Type | All Types |
| ||||
Standard | EN 520 +A1 (Gypsum Sheets – Recipes – Requirements and Test Methods) |
| |||||
Type | Gypsum Sheet (A) |
| |||||
Packaging | |||||||
| General Type | All Types |
| ||||
Thickness | 12,5 mm | 6,5 mm | 9,5 mm | 12,5 mm | 15 mm | 18 mm |
|
Number of boards in one pallet | 50 pcs/pallet | 60 pcs/pallet | 60 pcs/pallet | 50 pcs/pallet | 40 pcs/pallet | 30 pcs/pallet |
|
*Different lengths than 2500 mm are produced according to special order.
Our company reserves the right to change the product specifications when it deems necessary.