Descriptio

FIBERPEG MIC 6 is a polyamide-based micro-reinforcement system that minimizes shrinkage and shrinkage cracks in ready-mix concrete and shotcrete applications, plaster and screed applications, and serves as a secondary reinforcement.

Estate

• Industrial floors, garages, airports.

• Machine foundations subjected to vibration, abrasion, rotation.

• Concrete exposed to mechanical and thermal stresses such as water tanks, swimming pools and marine structures.

• Thin floors..

• manufacture of pipes.

• All prefabricated elements.

• Non-structural elements, concrete blocks.

• Sidewalk, curb, flower pot, tile.

• For all shotcrete applications.

• In cement-based mortars such as plaster, repair and insulation.

Features

• Unlike other synthetic fibers, its moisture retention is 5%. The moisture retained in the fibers at the fresh concrete stage is returned to the concrete as the concrete is taken, which has an internal hardening effect.

• Thanks to its internal hardening effect, it offers higher structural integrity by minimizing the formation of cracks due to heat and shrinkage.

• Increases shotcrete adhesion and minimizes rear bounces for effective application.

• Compatible with all quality concretes and all subsidence concretes.

• Resistant to saline, alkaline and acidic effects.

Standards

FIBERPEG MIC 6: EN 14889-2 Class I for hardened concrete

Advantages

•Increases impact resistance.

• Ensures improved waterproofness and durability.

• Since it allows the elimination of cracks, it cannot form channels through which water can pass.

• Mechanical strength is high due to low segregation and high homogeneity.

• The energy absorption and compactness of concrete increases.

• The fire resistance of concrete increases.

• Increases fracture resistance on concrete corners and edges.

• Reduces the corrosion rate of the metal carrier reinforcement.

• Offers resistance against freeze-thaw.

Use and quantity

FIBERPEG MIC 6, should be added gradually and slowly to the mixture in the mixer or mixer at the concrete plant. The mixture should be prepared as follows;

• Aggregate, water and cement are mixed.

• During mixing, FIBERPEG MIC 6 is added and mixed for at least 7 to 10 minutes.

• To easily use the mixture, it is recommended to use a super plasticizing concrete mixture instead of adding water. (The addition of FIBERPEG MIC 6 does not change the concrete mix and additive ratios.) It is recommended to use FIBERPEG MIC 6 in a ratio of 0.6-1.8 kg per m3. This ratio varies depending on the components used in the design of the concrete mixture. Therefore, laboratory tests should be performed based on the expected properties of fresh concrete and hardened concrete before the utilization rate is determined and the mixing ratio should be determined based on these experiments.

Technical specifications

Storage conditions

The product must be stored above 5°C in its original packaging. The lifespan is unlimited when stored in a dry, protected and ventilated environment, away from the sun, rain and frost. It is available in packages of 600 and 900 grams soluble in water.