Descriptio

SUPERPEG 400 / 400 S / 400 W, is a modified sulfonate-based modified sulfonate blend, highly water reducing, force enhancing, and superplasticizing

Domain

• In all ready-mixed concrete categories described in EN 206 and EN 13515

• Low water/cement ratio concrete applications

• Waterproof concrete applications • Smooth surface applications such as bridges/viaducts • In the construction of all elements of ‘a construction.

Pros

• SUPERPEG 400/400 S/400 W is a super plasticizing concrete mix that allows working on fresh concrete without causing segregation

• It lets concrete mixing patterns form with low water/cement levels;

• It increases the endurance of hardened concrete against environmental effect conditions

• It does not include chloride ions and does not cause corrosion of the paraphernalia.

• It provides long-term consistency protection to fresh concrete. This makes it possible to transport the fresh concrete mixture over long distances.

Utilisatio

• SUPERPEG 400 / 400 S / 400 W is ready to use as a liquid for mixing fresh concrete. It is recommended to add it to the mixing water in the ready-mix concrete production plant.

Use of weather conditions

• Summer month SUPERPEG 400 S

• Winter month SUPERPEG 400 W

• Transition month SUPERPEG 400

Standards

• SUPERPEG 400 S: EN 934-2 Table 11.1,11.2 ASTM C 494 Peak G

• SUPERPEG 400 W: EN 934-2 Table 3.1, 3.2 ASTM C 494 Peak F

• SUPERPEG 400: EN 934-2 Table 3.1, 3.2 ASTM C 494 Peak F

Quantity of use

It is recommended to use the total binder in the design of the mixture in a range of 0.5% to 1.8% by weight for all concrete grades described in EN 206 and EN 13515. This ratio varies depending on the cement, aggregate, mineral additive, water components used in the design of concrete mixtures, as well as the desired properties of fresh and hardened concrete. Therefore, laboratory tests should be performed based on the expected properties of fresh concrete and hardened concrete before the utilization rate is determined and the mixing ratio should be determined based on these experiments.

Storage conditions and

The product should be stored above 5 °C. In case of freezing, the product must be mechanically mixed carefully after thawing. Available in 25 kg barrels, 200 kg barrels, 1,000 kg IBC tanks and bulk.

Compatibility

SUPERPEG 400/400 S/400 W is compatible with PLASTPEG, Airpeg,Antipeg,Retardpeg, Proofpeg, Specialpeg construction chemicals from PEGASUS. The PEGASUS Technical Support Unit should be contacted for information on compliance with other additives. If more than one additive is to be used in the desired mixture design, each additive must be added separately to the mixture. SUPERPEG 400 / 400 S / 400 W can be used with all types of cement according to EN 197-1. For use in special types of cement, it is recommended to call on the technical support of PEGASUS

Precaution of use

Avoid any contact of the product with the eyes or skin, in case of contact with them, rinse thoroughly with water. In case of contact with the eyes, wash immediately and thoroughly with water and then consult a specialist. Use gloves, a protective mask and goggles during use. For more information, refer to the product’s Safety Data Sheet (MSDS).