Descriptio

Cement additives of the CEMPEG KA series are intended to facilitate the grinding of minerals on a general level, and more particularly cements In addition to conventional grinding facilitators, it also has a positive effect on the efficiency of the grinder and cement flow. This also helps to increase the initial strength of the cement.

Advantages of use

• The amount of crushed cement increases at the exit of the factory.

• The fineness of cement increases by up to 12% and /or the cost of unit energy and grinding decreases.

• It helps reduce production costs by helping mineral additives (blast furnace slag, fly ash) or limestone to be used instead of clinker to produce added cement.

Characteristics

Cempeg KA series chemicals reduce the electrical attraction between cement particles, prevent agglomeration and increase the hydration rate of cement.

Utilisatio

The use of additive varies between 0.04% and 0.15% in tons. In view of laboratory studies, it is recommended to determine the ratio between clinker and other additives, the effect on grinding, the effect on setting times, the viscosity of the mortar and the compressive strength of the cement.

Dosing equipment

The use of cement additives from the CEMPEG series via a calibrated dosing system is suitable for grinding. PEGASUS can advise you on any suitable equipment for installation, including manual, semi-automatic, automated and computerized systems. Storage conditions and packaging The product must be stored above 5 °C. In case of freezing, the product must be mechanically mixed carefully after thawing. Available in 25 kg barrels, 200 kg barrels, 1.00 kg IBC tanks and bulk.

Precaution of Use

Avoid contact of the product with the eyes or skin. In case of contact with the eyes, rinse immediately and thoroughly with water and then consult a specialist. Use gloves, a protective mask and goggles during use. For more information, read the product’s Safety Data Sheet (MSDS).