Descriptio

CUREPEG A, is an evaporation-reducing processing material based on acrylic resin, applied to freshly poured concrete. The layer of the formed film retaining water allows development in the force of development and reduces shrinkage by preventing rapid drying.

Field of application

• Vertical and horizontal structure of element blunting

• In surface hardener applications,

• In airport and field concretes,

• In canal and nozzle concretes

• It is used in concrete rooms where humidity is low, evaporation and drafts are high.

Features

• It reduces shrinkage cracks caused by rapid drying on the surface.

• It provides a harder and less dusty surface.

• It is applied in order to obtain more brightness on pavement and floor concrete surfaces.

• It is not fixative and easy to use.

• It offers a more efficient and economical solution compared to treatment methods such as burlap watering or irrigation on the surface of concrete.

• UV resistant, reflecting sunlight and reducing the risk of water loss in fresh concrete.

• It is specially used in construction concrete.

Utilisatio

• It must be applied evenly by spraying with a sprayer or roller.

• After curing, the drying time of the product is 1 to 2 hours with 20 ° C.

• After hardening applications in open areas, the concrete surface should be protected from external factors such as rain and snow for 2-3 hours. After this time, the concrete surface is no longer affected, even by rainwater.

Amount of usage

Depending on the absorbation of the concrete surface and the ambient temperature; Brush applications, roller 0.100 – 0.250 kg / m² Spray applications 0.150 – 0.250 kg / m²

Storage conditions

Shelf life is 1 year in its original packaging at -5 °C / -25 °C in dry, protected and ventilated places, protected and ventilated, protected from direct sunlight and frost. Available in 25 kg barrels, 200 kg barrels, 1,000 kg IBC tanks and bulk.

Precaution for use

Avoid contact of the product with the eyes or skin. In case of contact with the eyes, rinse immediately and thoroughly with water and then consult a specialist. Use gloves, a protective mask and goggles during use. The Safety Data Sheet (MSDS) should be read for detailed information.