Descriptio

CUREPEG B is used to harden concrete after all applications of fresh concrete and concrete surface hardener and to prevent dust formation by obtaining an insulated layer in the concrete. It is possible to apply it to the old concrete, which increases the performance of the concrete surface and prevents powdering. A shiny appearance is achieved on the surface. It is a transparent curing material based on acrylic resin and solvent. When applied, it forms an insulated layer in the concrete and prevents the rapid evaporation of water into the concrete. The applied material also provides a transparent and protective film, insulation and prevents the formation of dust on the surface.

Field of application

• Hardening of vertical and horizontal structural elements,

• In surface hardener applications,

• In airport, field and pipe concretes,

• Used in concrete pouring where humidity is low, evaporation and drafts are high characteristics

• It reduces shrinkage cracks caused by rapid drying on the surface.

• It provides a harder and less dusty surface.

• It is not corrective and easy to use

• UV resistant. Reflects solar heat and reduces the risk of water loss in fresh concrete.

• Specially used in construction concrete.

Utilisatio

• It must be applied evenly by spraying with a sprayer or roller.

• The product should be well before use

• After curing, the drying time of the product is 1-2 hours with 20 ° C.

• After hardening applications in open areas, the concrete surface should be protected from external factors such as rain and snow for 2-3 hours. After this time, the concrete surface is no longer affected, even by rainwater.

Amount of usage

Depending on the concrete surface and ambient temperature; For brush and roller applications 0.150 – 0.250 kg / m² For spray applications 0.200 – 0.250 kg / m²

Storage conditions

Shelf life is 1 year in its original packaging at -5 °C / -25 °C in dry, protected and ventilated places, protected and ventilated, protected from direct sunlight and frost. Available in 25 kg barrels, 200 kg barrels, 1,000 kg IBC tanks and bulk.

Precaution for use

Avoid contact of the product with the eyes or skin. In case of contact with the eyes, rinse immediately and thoroughly with water and then consult a specialist. Use gloves, a protective mask and goggles during use. For more information, refer to the product’s Safety Data Sheet (MSDS).