Descriptio

CUREPEG C, is an evaporation-reducing processing material based on acrylic resin, applied to freshly poured concrete. The formed film layer retaining water allows development in the force of development and reduces shrinkage by preventing rapid drying.

Field of application

• Hardening of vertical and horizontal structural elements,

• In surface hardener applications,

• In airport, field and pipe concrete,

• Used in concrete pouring where humidity is low, evaporation and drafts are high characteristics

• l reduces shrinkage cracks caused by rapid drying on the surface.

• It provides a harder and less dusty surface.

• It is applied to achieve greater shine on the surface, in the field, on the road and for concrete dosing.

• It provides a more efficient and economical solution compared to curing methods such as watering on bags, sinking on concrete or concrete surface

• It is non-flammable and easy to use

• UV resistant. Reflects solar heat and reduces the risk of water loss in fresh concrete.

• It is specially used in construction concrete.

Utilisatio

• It must be applied evenly by spraying with a sprayer or roller.

• Pay attention to the formation of puddles.

• The product must be stirred well before use

• After curing, the drying time of the product is 1 to 2 hours with 20 ° C.

• After hardening applications in open areas, the concrete surface should be protected from external factors such as rain and snow for 2-3 hours. After this time, the concrete surface is no longer affected, even by rainwater.

• If hardening is applied, the curing surface should be cleaned with hot water, brush or water jet.

Amount of usage

Depending on the concrete surface and ambient temperature; For brush and roller applications 0.150 – 0.250 kg / m² For spray applications 0.200 – 0.250 kg / m²

Storage conditions

Shelf life is 1 year in its original packaging at -5 °C / -25 °C in dry, protected and ventilated places, protected and ventilated, protected from direct sunlight and frost. Available in 25 kg barrels, 200 kg barrels, 1,000 kg IBC tanks and bulk.

Precaution for use

Avoid contact of the product with the eyes or skin. In case of contact with the eyes, rinse immediately and thoroughly with water and then consult a specialist. Use gloves, a protective mask and goggles during use. For more information, refer to the product’s Safety Data Sheet (MSDS).