Descriptio

FIBERTON ST 80×60, is a steel wire for reinforced concrete, which increases the strength of concrete when mixed homogeneously with concrete and prevents cracks.

Domain

• Industrial floor applications

• Airports

• Concrete roads

• Ports

• Concrete pipes

• Tunnels

• Car park flooring.

• Gas stations

Technical specifications

Form and performance

Length: 60 mm Diameter: 0.75 mm 80: Performance class (c/d Thread class: Hook wire

Standards

Polifiber ST80X60 EN 14889-1

Advantages of use

• Offers maximum impact resistance.

• Provides improved crack control.

• Increases load capacity.

• Saves money and time.

• Reduces labor costs.

• Reduces risks to workers and workers’ health.

Use and quantity

• The water/cement ratio should be maintained at a maximum of 0.45.

• The subsidence of the concrete must be at least 12 cm.

• The amount of cement in concrete should be at least 320 kg / m³.

• The compressive strength of concrete should be at least 20 N / mm².

• Problems that may be encountered regarding the maneuverability of concrete should be solved by adding a plasticizing additive for concrete instead of increasing the mixing water.

• The plasticizing additive must be added to the mixture before adding the steel fibers.

• Sagging can be adjusted on site with redosage additives. Addition of wires to concrete; Mixing in a concrete plant; With aggregates;

• The fibers are poured on aggregate and sand and mixed.

• Cement, water and other additives are added to the mixture.

• The mixture is continued until a homogeneous mixture is obtained. On ready-mixed concrete;

• Fibers are added to ready-mixed concrete in the concrete plant.

• The mixture is continued until the fibers are well mixed (2-4 minutes). Mixing in transmixer;

• With aggregates;

• Aggregates and fibers are introduced into the mixer and mixed.

• Cement, water and other additives are added.

• The mixture is continued until a homogeneous mixture is obtained (2-4 minutes). On ready-mixed concrete in the mixer;

• The mixer drum begins to rotate at high speed.

• Fibers are mixed in concrete at a speed of 20-30 kg / minute.

• After adding all the fibers, the blender is mixed for 5 minutes. Addition of wires to the machine by concrete

• Fibers are added to ready-mixed concrete during the rotation of the mixer.

• No additional mixing time required.

Storage conditions

• Keep in the original packaging.

• Lifespan is unlimited when stored in dry and protected environments.

• Available in 20 kg bags and 1,000 kg pallets.