Descriptio

MOLDPEG FB is a mineral oil-based release agent that allows easy separation of molds by

Field of Application

from concrete and creates smooth concrete surfaces.

• Steel, plastic, plywood chests

• In applications requiring more efficient formwork Advantages

• It provides a smooth and clean concrete surface.

• It is easy to disassemble and clean formwork.

• It prolongs the life of the formwork.

• It allows a uniform, stainless and smooth surface.

• Reduction of formwork and labor costs.

Utilisatio

• MOLDPEG FB: before applying the release agent, the molds must be dry and clean, concrete and rust residues must be removed.

• MOLDPEG FB must be well stirred before application.

• The application can be carried out with a homogeneous layer with a brush, roller or sprayer.

Amount of usage

Steel molds: 80 -120 ml Plywood molds: 100 – 150 ml Plastic molds: 120 – 200 ml

Storage conditions and

The product should be stored above 5 °C. In the event that the product freezes, it must be thoroughly mixed mechanically after thawing for restitution. It is on sale as a 25 kg plastic drum, 200 kg drums, or 1,000 kg plastic cubicles.

Precaution for use

The additive should be away from the skin and eyes. In case of contact, it should be washed with water. Safety glasses   / gloves / protective masks should be used when using the mixture. The Safety Data Sheet (MSDS) should be read for more detailed information.